Как я могу устранить сообщение об ошибке "ваша установка php, по-видимому, отсутствует расширение mysql, которое требуется wordpress."

---

Вопрос: Я установил Wordpress локально на веб-сервере Apache, но при запуске получаю сообщение об ошибке "http://localhost/wordpress/"[1]

Зонд - Генерал:
Эта проблема возникает при первой установке Wordpress. Я действительно установил MySQL (последняя версия 64); и я проверил, что Apache способен запускать - например - cgi-скрипты. Я действительно настроил его wordpress.php файл тоже. Я использую это, чтобы проверить установку MySQL, что она доступна с PHP. Я также настроил php_test (test.php) файл, который запускает следующий php-код:

<?php
phpinfo();
?>

Статус: Этот вопрос еще не решен.

Зонд - Исследование:
Я обнаружил, что следующее исследование может быть актуальным, и я сосредоточусь на нем в первую очередь:

1. WordPress › Support » Your PHP installation appears to be missing the MySQL extension...
https://wordpress.org/support/topic/your-php-installation-appears-to-be-missing-the-mysql-extension-1

2. WordPress › Support » Your PHP installation appears to be missing the MySQL extension which is require
https://wordpress.org/support/topic/your-php-installation-appears-to-be-missing-the-mysql-extension-which-is-require

Первоначальное разрешение

Релевантным файлом является конфигурационный файл Apache httpd.conf:

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
# will be interpreted as '/logs/access_log'.
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "c:/Apache24"

#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:logs

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_core_module modules/mod_authn_core.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule data_module modules/mod_data.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule http2_module modules/mod_http2.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule lua_module modules/mod_lua.so
#LoadModule macro_module modules/mod_macro.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule request_module modules/mod_request.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule xml2enc_module modules/mod_xml2enc.so

<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin admin@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <Directory> blocks below.
#
<Directory />
    AllowOverride none
    Require all denied
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "c:/Apache24/htdocs"
<Directory "c:/Apache24/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.php index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ".ht*">
    Require all denied
</Files>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "logs/access.log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access.log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "c:/Apache24/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock cgisock
</IfModule>

#
# "c:/Apache24/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "c:/Apache24/cgi-bin">
    AllowOverride None
#    Options None
#  SE:  The above was modified per http://editrocket.com/articles/perl_apache_windows.html
    Options Indexes FollowSymLinks ExecCGI 
    Require all granted
</Directory>

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    AddHandler cgi-script .cgi .pl

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile on

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

# Customer Installation per:  https://docs.moodle.org/29/en/Manual_install_on_Windows_7_with_Apache_and_MySQL
#   LoadModule php5_module "C:/PHP/php5apache2_4.dll"
#   AddHandler application/x-httpd-php .php
#   PHPIniDir C:/PHP

#Intallation of the php mode per:  https://wordpress.org/support/topic/missing-the-mysql-extension-1   
#This LoadModule is not available
#LoadModule php5_module modules/libphp5.so
LoadModule php5_module "C:/PHP/php5apache2_4.dll"
PHPIniDir C:/PHP

#First option - only php files
#<FilesMatch \.php$>
#SetHandler application/x-httpd-php
#</FilesMatch>

#Second option - php  .php, .php2, .php3, .php4, .php5, .php6, and .phtml files to be executed as PHP
<FilesMatch "\.ph(p[2-6]?|tml)$">
SetHandler application/x-httpd-php
</FilesMatch>

#Third option -  And to allow .phps files to be executed as PHP source files, add this:

<FilesMatch "\.phps$">
SetHandler application/x-httpd-php-source
</FilesMatch>

Когда я читаю вопрос, отображается только верхняя часть файлов httpd.conf. Итак, ниже - все остальное. Самая нижняя часть - это то, что важно с точки зрения возможности загрузки PHP и MySQL.

#Установка режима php в соответствии с: https://wordpress.org/support/topic/missing-the-mysql-extension-1
#Этот LoadModule недоступен
Модули #с loadmodule php5_module/libphp5.так
С loadmodule php5_module "C:/PHP/php5apache2_4.dll"
PHPIniDir C:/PHP

Первый вариант - только PHP файлы
#<FilesMatch \.php$>
#Приложение SetHandler/x-httpd-php
#</FilesMatch>

Второй вариант - на PHP .на PHP, .php2 участка, .php3, .для PHP4, .в php5, .php6, а .phtml файлов должен быть выполнен как PHP
<FilesMatch "\.ph(p[2-6]?|tml)$">
Приложение SetHandler/x-httpd-php
</FilesMatch>

#Третий вариант - и чтобы разрешить выполнение файлов .phps в качестве исходных файлов PHP, добавьте это:

<FilesMatch "\.phps$">
Приложение SetHandler/x-httpd-php-source
</FilesMatch>

Что я уже пробовал:

1. я попытался создать простой php - файл для подключения к MySQL-та же проблема; так что проблема не в Wordpress; также прокомментировал раздел за разделом в коде, чтобы узнать, что ошибка не была проблемой входа в систему. Я получил сообщение об ошибке: "не удалось установить соединение, потому что целевая машина активно отказала ему."

<?php
// From:  https://dev.mysql.com/doc/apis-php/en/apis-php-function.mysql-connect.html
// we connect to example.com and port 3307

$link = mysql_connect('localhost:3307', 'Wordpress', 'the_actual_password');
if (!$link) {
    die('Could not connect localhost:3307 : ' . mysql_error());
}
echo 'Connected successfully';
mysql_close($link);

// we connect to localhost at port 3307
//$link = mysql_connect('127.0.0.1:3307', 'Wordpress', 'the_actual_password');
if (!$link) {
    die('Could not connect 127.0.0.1:3307 : ' . mysql_error());
}
echo 'Connected successfully';
mysql_close($link);

//Following mysql_connect(): No connection could be made because the target machine actively refused it
//See http://stackoverflow.com/questions/21987746/mysql-connect-no-connection-could-be-made-because-the-target-machine-actively

// we connect to localhost at port 3307
$link =  mysql_connect("localhost","root" ,""); // will connect
if (!$link) {
    die('Could not connect localhost as root: ' . mysql_error());
}
echo 'Connected successfully';
mysql_close($link);
 
?>

Я попытался отключить брандмауэр - не разрешено групповой политикой; я попытался с Windows 7 перейти к брандмауэру Windows с повышенной безопасностью и создать пользовательское входящее правило для порта 3306, а также пользовательское исходящее правило для порта 3306, разрешающее входящий и исходящий доступ к этим портам - та же проблема.

Я попробовал использовать базовую программу open office - я попытался запустить программу после установки; программа не запускается! Следующим шагом является перезагрузка компьютера windows.

Я также попытался исследовать этот вопрос дальше:

3. How do I resolve the error message "Your PHP installation appears to be missing the MySQL extension which is required by WordPress." -Google

4. WordPress › Support » Your PHP installation appears to be missing the MySQL extension...
https://wordpress.org/support/topic/your-php-installation-appears-to-be-missing-the-mysql-extension-1

5. WordPress › Support » Your PHP installation appears to be missing the MySQL extension which is require
https://wordpress.org/support/topic/your-php-installation-appears-to-be-missing-the-mysql-extension-which-is-require

6. phpinfo()
http://localhost/test.php

7. file:///c:/PHP/php.ini
file:///c:/PHP/php.ini

8. file:///c:/PHP/php.ini
file:///c:/PHP/php.ini

9. phpinfo()
http://localhost/test.php

10. how to have php load config file again -Google


11. PHP: Command line usage - Manual
http://php.net/manual/en/features.commandline.php

12. how to check php mysql from the php command line - Google

13. PHP: mysql_connect - Manual
http://php.net/manual/en/function.mysql-connect.php

14. php command line shell tutorial -Google


15. Command-line PHP? Yes, you can!
http://www.ibm.com/developerworks/library/os-php-command/

16. file:///c:/Apache24/logs/error.log
file:///c:/Apache24/logs/error.log

17. php connect to mysql database with the mysql module -Google

18. PHP/MySQL Tutorial - Learn how to connect MySQL with PHP
https://www.siteground.com/tutorials/php-mysql/php_mysql_connection.htm

19. PHP/MySQL Tutorial - Learn how to establish MySQL connection
https://www.siteground.com/tutorials/php-mysql/database_connection.htm

20. PHP Connect to MySQL
http://www.w3schools.com/php/php_mysql_connect.asp

21. PHP: Comments - Manual
http://php.net/manual/en/language.basic-syntax.comments.php

22. php mysql mysql_connect example - Google

23. MySQL :: MySQL PHP API :: 5.5.4 mysql_connect
https://dev.mysql.com/doc/apis-php/en/apis-php-function.mysql-connect.html

24. php mysql_connect(): No connection could be made because the target machine actively refused it. -Google

25. php - mysql_connect(): No connection could be made because the target machine actively refused it - Stack Overflow
http://stackoverflow.com/questions/21987746/mysql-connect-no-connection-could-be-made-because-the-target-machine-actively

26. how to verify windows 7 firewall connection for localhost -Google


27. networking - How to check if a port is blocked on a Windows machine? - Server Fault
http://serverfault.com/questions/26564/how-to-check-if-a-port-is-blocked-on-a-windows-machine

28. windows 7 netstat -a -n - Google Search

29. mysql netstat state established - Google Search


30. MySQL :: mysql, number of TCP connections does not match on server / client machines
http://forums.mysql.com/read.php?39,581155,581155

31. NETSTAT - The Easy Tutorial
http://openmaniak.com/netstat.php

32. how to verify windows 7 firewall connection for localhost - Google Search

33. networking - How to check if a port is blocked on a Windows machine? - Server Fault
http://serverfault.com/questions/26564/how-to-check-if-a-port-is-blocked-on-a-windows-machine

34. start windows firewall logging windows 7 - Google Search

35. Configure the Windows Firewall Log
https://technet.microsoft.com/en-us/library/cc947815(v=ws.10).aspx

---